Stone Sweeping Robot(Roborock) is currently the most advanced black technology on the market Sweeping robot, Remove the scan robot of other brands from behind.
It is characterized by: the highest suction power of 5100Pa, supports ultrasonic mopping function, intelligent obstacle avoidance navigation, 3D maps, and self-cleaning bases with excellent performance.Although Roborock starts later than IROBOT, if the science and technology level of the floor sweeping robot alone, the stone sweeping robot is already IROBOT scanning robot Above it, perfectly achieved transcendence.
The latest models of the currently on the stone sweeping robot are Roborock S7 Maxv(Published in 2022) and Roborock S7(Published in 2021) should be the focus of your attention.
What are the current series and models of stone sweeping robots?What sweeping robotic parameters should be paid when buying?Which advanced black technology has made stones the best in the industry?What are the recommended styles in different series?If you are planning to start a screen sweeping robot, the stone sweeping robot will definitely enter your alternative list.
Directory of this article
- The most popular stone sweeping robot
- What are the models of stone sweeping robots?
- Introduction to the Scanning Robot Sweeping Robot Sweeping Robot Sweeping Robot?
- What are the advanced black technologies of the stone sweeping robot?
The most popular stone sweeping robot
Roborock S7 Maxv Ultra Scan Robot
Affiliate Link
Sweeping robot parameter
- Maximum suction: 5100Pa
- Navigation Technology: LDS Lidar Navigation
- Reactiveai
- Map drawing: store multi-level maps, support 2D maps, 3D maps and Matrix maps
- Main roll brush type: pure rubber roller brush
- Drag the ground: ultrasonic vibration mopping floor
- Carpet cleaning ability: The sweeping function can be automatically raised when the carpet can be detected
- Self-cleaning base: EMPTY WASH FILL Dock Self -Cleaning base
Sweeping robot introduction
The latest model of the stone sweeping robot is equipped with the EMPTY WASH FILL Dock self-cleaning base for the S7 MAXV sweeping robot that provides 5100Pa suction.It supports automatic cleaning, water and empty dust compartment functions, and truly simplify the maintenance of sweeping robots.
Equipped with ReactiveAI 2.0 obstacle avoidance technology, with the RGB camera on the front side of the fuselage and the LED lights on both sides of the lens, you can accurately locate in any environment and also support real-time video function.
The automatic lifting function can automatically raise the height of the carpet when it is detected to enter the carpet area, regardless of cleaning or mopping the floor.
advantage
- With EMPTY WASH FILL Dock self-cleaning base, providing a full range of self-cleaning performance
- Use Reactiveai 2.0 to avoid obstacle avoidance technology
- Automatic lifting function to make better cleaning work in the carpet area
shortcoming
- Expensive price
- There will be more adjustment options on mobile applications
Roborock S7 Maxv Plus sweeping robot
Affiliate Link
Sweeping robot parameter
- Maximum suction: 5100 PA
- Navigation Technology: LDS Lidar Navigation
- Reactiveai
- Map drawing: store multi-level maps, support 2D maps, 3D maps and Matrix maps
- Main roll brush type: pure rubber roller brush
- Drag the ground: ultrasonic vibration mopping floor
- Carpet cleaning ability: The sweeping function can be automatically raised when the carpet can be detected
- Self-cleaning base: Auto-Empty Dock Self-Cleaning base
Sweeping robot introduction
The S7 MAXV model of the stone sweeping robot and the self-clean base with multiple filtering system Auto-EMPTY Dock provides better cleaning performance.
The super suction power of 5100Pa can be cleaned up efficiently.After returning to the cleaning base after the cleaning work is completed, the base will automatically extract the garbage in the robot’s dust compartment.friendly.
The S7 Maxv uses the LDS laser navigation system.With the LED lighting light in the front, it can be accurately located in any environment to identify intelligent obstacles and efficiently complete the cleaning work.
advantage
- Auto-EMPTY Dock’s self-cleaning base with multiple filtering systems;
- S7 Maxv sweeping robot uses LDS laser navigation technology, with LED lighting, which can be located in the dark environment;
- The super 5100Pa suction power can clearly know the vast majority of ground garbage;
- The camera on the front side of the fuselage supports real-time video call function;
shortcoming
- Excessive price;
- The camera function will make people worry about privacy and safety;
- Do not support the automatic cleaning function of the mop cloth;
Roborock S7+ Scanning Robot
Affiliate Link
Sweeping robot parameter
- Maximum suction: 2500 PA
- Navigation Technology: LDS Lidar Navigation
- Observation technology: laser scanning obstacle avoidance
- Map drawing: store multi-level maps, support 2D maps, 3D maps
- Main roll brush type: pure rubber roller brush
- Drag the ground: ultrasonic vibration mopping floor
- Carpet cleaning ability: The sweeping function can be automatically raised when the carpet can be detected
- Self-cleaning base: Auto-Empty Dock Self-Cleaning base
Sweeping robot introduction
This sweeping robot contains the S7 model robot and the self-clean base Auto-EMPTY Dock with multiple filtering systems, which provides excellent cleaning and mopping performance.
Provide a maximum suction power of 2500 PA, which can be clear about most ground garbage, LDS lidar navigation technology and ReactiveAI obstacle avoidance technology, which can be accurately navigated.At the same time, different types of obstacles can be identified for intelligent obstacles to make cleaning work more intelligent.
Upgrade mop function, support the ultrasonic vibration mop function, and clean up ground stains with high frequency vibration and 600G pressure.
Supporting various control methods such as fuselage control, mobile APP control, and voice control, which is more flexible and convenient.
advantage
- Upgrade mop function, support ultrasonic vibration mop;
- Improve the mop efficiency with 600g pressure;
- LDS lidar navigation technology and ReactiveAI barriers can be intelligently avoided, and 2D or 3D maps are drawn to personalize the cleaning and sweeping robotic parameters in different areas;
shortcoming
- Excessive price;
- Without LED lighting, the performance of navigation functions in a dim environment may decline;
Roborock S7 Sweeping Robot
Affiliate Link
Sweeping robot parameter
- Maximum suction: 2500 PA
- Navigation Technology: LDS Lidar Navigation
- Observation technology: laser scanning obstacle avoidance
- Map drawing: store multi-level maps, support 2D maps, 3D maps
- Main roll brush type: pure rubber roller brush
- Drag the ground: ultrasonic vibration mopping floor
- Carpet cleaning ability: The sweeping function can be automatically raised when the carpet can be detected
- Self-cleaning base: It can be used with Auto-Empty Dock self-cleaning base and needs to be purchased separately
Sweeping robot introduction
Stone Sweeping Robot S7 model, upgraded the mop function, can provide 3,000 shock-vibrating ultrasonic vibration mop per minute, and it can be automatically lifted to better clean the carpet when detecting the carpet area.The user of the carpet.
Use floating all-rubber roller brushes, not easy to wrap the hair, and better clean up the hair dropped by pets.
Navigation technology supports drawing 2D maps or 3D maps, which can freely set up information such as cleaning and sweeping robotic parameters and timetables in different areas, as well as different regions, bringing more personalized cleaning services.
advantage
- Improve the mop function and support the ultrasonic vibration mop;
- Using full full glue roller brush, it is not easy to wrap the hair;
- You can freely set a variety of clean-cleaning robot parameters in mobile applications;
shortcoming
- It is necessary to manually clean the dust warehouse.When dumping the garbage, it may cause secondary pollution to the air;
- You need to manually clean the mop cloth;
Roborock S6 Pure Cleaning Robot
Affiliate Link
Sweeping robot parameter
- Maximum suction: 2000 PA
- Navigation Technology: LDS Lidar Navigation
- Observation technology: laser scanning obstacle avoidance
- Map drawing: Storage of multi-level maps, supporting 2D maps
- Main roll brush type: fiber rubber combination roller brush
- Mopping method: Different water volume adjustment mop
- Carpet cleaning ability: The sweeping function can be automatically raised when the carpet can be detected
- Self-cleaning base: do not support the self-cleaning base
Sweeping robot introduction
With a variety of custom setting functions, the LDS laser navigation system can draw a clear ground environment map.You can customize various spaces in the mobile APP, name the type of room, divide rooms, set up cleaning and prohibited banks.Districts, etc., can also set different automatic starting time.
Laser navigation technology can intelligently avoid multiple obstacles, and plan more reasonable cleaning routes to intelligently avoid the cleaning work.
The water tank supports electronic control water volume.With the custom function of different areas, it can be more suitable for different water volume on different types of ground to perform a more appropriate mop cleaning ability.
advantage
- Use laser navigation technology, positioning and map drawing are more accurate;
- The automatic lifting function can better clean the carpet area;
- Electronic control water can allow robots to drag the floor with appropriate water volume on different grounds;
shortcoming
- Do not support ultrasonic vibration mop function;
- Use the fiber and rubber combination to roll the brush to easily wrap the hair and reduce the cleaning efficiency;
Roborock Q7 MAX+ Scanning Robot
Affiliate Link
Sweeping robot parameter
- Maximum suction: 4200 PA
- Navigation Technology: LDS Lidar Navigation
- Observation technology: laser scanning obstacle avoidance
- Map drawing: store multi-level maps, support 2D maps, 3D maps
- Main roll brush type: all rubber roller brush
- Drag the floor: fixed pressure mop the floor
- Carpet cleaning capacity: The sweeping function can be automatically increased when the carpet can be detected
- Self-cleaning base: Auto-Empty Dock Self-Cleaning base
Sweeping robot introduction
The Q7 MAX sweeping robot using laser navigation technology can automatically increase the sweeping absorption when the carpet area is monitored and clean the carpet surface with a maximum suction power of 4200Pa.The mop with a fixed pressure can be mopped immediately after the cleaning is completed to make the cleaning more efficient.The robot supporting uses Auto-EMPTY Dock self-cleaning base.After each cleaning work is completed, it automatically extracts the garbage in the dust compartment and inhaled the sealing dust bag.Secondary pollution.Support 2D and 3D map drawing, as well as various regional settings, such as cleaning, prohibited areas, prohibited mop areas, etc.
advantage
- Provide up to 4200 PA pressure, which can clean the carpet area well;
- Support a variety of map drawing, and the cleaning robot parameter settings in different regions;
- With Auto-Empty Dock self-cleaning base, it can reduce the number of dumping and secondary pollution;
shortcoming
- The mop head is fixed pressure, and it cannot be well cleaned on the carpet;
- Do not support multiple filtration systems from the cleaning base;
Roborock Q7+ Scanning Robot
Affiliate Link
Sweeping robot parameter
- Maximum suction: 2700 PA
- Navigation Technology: LDS Lidar Navigation
- Observation technology: laser scanning obstacle avoidance
- Map drawing: store multi-level maps, support 2D maps, 3D maps
- Main roll brush type: all rubber roller brush
- Drag the floor: fixed pressure mop the floor
- Carpet cleaning ability: no special performance
- Self-cleaning base: Auto-Empty Dock Self-Cleaning base
Sweeping robot introduction
The sweeping robot supporting up to 2700 PA suction is combined with Auto-Empty Dock self-cleaning base, which can provide excellent cleaning performance.The suction power of 2700 PA can clearly understand the vast majority of garbage on the hard floor and the carpet.The mop that supports the adjustment of water volume can help you clean the ground stain easier.
With Auto-Empty Dock self-cleaning base, you can automatically remove garbage in the dust collection warehouse after the robot returns.After entering the sealing bag, you can avoid secondary pollution of the air.More simplified.
Support multi-level map storage, set up different areas and clean-cleaning robotic parameters, and also support 3D map drawing to better identify obstacles in different areas and regions.
advantage
- The suction power of up to 2700 PA can efficiently remove more types of garbage;
- With Auto-Empty Dock self-cleaning base, it can simplify the garbage dumping program to avoid secondary pollution of air;
- Use the full rubber roller to avoid wrapped hair;
shortcoming
- Special cleaning functions are not set up for carpets, and cleaning may not be completed on some types of carpets;
- Auto-EMPTY Dock’s self-cleaning base does not have multiple filtering systems;
Roborock Q5+ Scanning Robot
Affiliate Link
Sweeping robot parameter
- Maximum suction: 2700 PA
- Navigation Technology: LDS Lidar Navigation
- Observation technology: laser scanning obstacle avoidance
- Map drawing: store multi-level maps, support 2D maps, 3D maps
- Main roll brush type: fiber rubber combination roller brush
- Drag the floor: fixed pressure mop the floor
- Carpet cleaning ability: no special performance
- Self-cleaning base: Auto-Empty Dock Self-Cleaning base
Sweeping robot introduction
The Q5 sweeping robot with a maximum 2700 PA suction can absorb most of the garbage on the ground, and the cleaning work can also be completed on the short velvet carpet.With Auto-Empty Dock’s self-cleaning base, you can simplify the maintenance process, and replace the sealing collection bag for about 7 weeks.
Support multi-level map storage functions, which can flexibly set up multiple areas and scanning robot parameters, such as classified rooms, setting cleaning, and restraint areas.The floating fiber rubber combination roller can better clean the fine particles, but it is easy to wrap the hair.Support multiple control methods such as voice control and mobile phone APP control, which is easier and simple.
advantage
- Support the suction of up to 27 PA;
- With Auto-Empty Dock self-cleaning base, which can simplify robot maintenance and avoid secondary pollution of air;
- Support multi-level map storage, you can view 2D maps and 3D maps, more flexible and finely set up different cleaning area sweeping robot parameters;
shortcoming
- Fixed mop head, the mopping performance in the carpet area is limited;
- Fiber rubber combination rolling brush, easy to wrap the hair, reduce cleaning performance;
Roborock E5 Scanning Robot
Affiliate Link
Sweeping robot parameter
- Maximum suction: 2500 PA
- Navigation technology: inertia navigation technology
- Observation technology: optical sensor and collision-free obstacle avoidance
- Map drawing: not stored maps
- Main roll brush type: fiber rubber combination roller brush
- Drag the ground: adjustable water volume mopping floor
- Carpet cleaning ability: automatically increase suction power
- Self-cleaning base: not support
Sweeping robot introduction
The model of the basic series of stone sweeping robots, using inertial navigation technology, relying on the dual-gyroscopes and optical sensors to identify obstacles.The logic of the logic of identifying information can be used.Clean the carpet garbage.
The mop that can control water volume can be cleaned with different water volume on different types of flooring.Support multiple methods such as mobile phone APP control, remote control control and voice control.
advantage
- cheap price;
- Planning logic cleaning route;
- Support multiple control methods;
- Use the carpet area to increase the suction design;
shortcoming
- Do not store maps;
- Use inertial navigation technology, limited accuracy;
- Fiber rubber combination rolling brush is easy to wrap hair to reduce cleaning performance;
What are the models of stone sweeping robots?
Stone sweeping robot is currently: S series As well as Q series and E series Three series of products.
Among them, the E series is the basic series.The Q series has been upgraded in terms of navigation.The S series is currently the highest-end series of stone sweeping robots.It not only upgrades the navigation technology, but also upgrades the mop function.The sense of use of floor sweeping robots.
The per capita configuration of stone sweeping robots in different series includes functions such as a water-washed E11 filter, supporting automatic recharge, application and voice control.
E series sweeping robot
The basic series of stone sweeping robots, which is low in price, supports maximum suction power of 2500Pa, and provides basic navigation performance and mopping function.In terms of control, in addition to fuselage control, application control, and voice control, the E series is also equipped with remote control control and diversified control methods.
The suction power of the E series
The E-series stone sweeping robot provides the basic suction of 2000Pa.When using strong cleaning, it can support the maximum suction of 2500Pa.It is clear that most of the ground solid garbage, such as oatmeal, paper crumbs, etc.
When entering the carpet area, the automatic carpet Boost technology will automatically improve the cleaning and suction of the robot and make in-depth cleaning.
E-series navigation
The E series uses inertia navigation technology, uses dual gyroscopes and optical sensors to identify obstacles, and plan logic cleaning routes to meet the basic cleaning needs of all users.
But stargazing navigation technology does not support storage maps.You can check the first cleaning map after each cleaning.
E series mop the floor
The E series is equipped with a fixed mop head.When the mop function is turned on, the mop head will immediately mop immediately after the cleaning work is completed, and complete the scanning work at one time.
However, the mop head of the E series cannot move up and down, which means that when entering the carpet area, the mop head cannot be lifted automatically, and the carpet may be wet, and the mop head in the E series does not support the ultrasonic vibration mop function.
E series battery life
The E-series has a battery life for a maximum of 200 minutes, but because the E-series sweeping robot supports the automatic recharge function, if the cleaning work cannot be completed in a single time, you can automatically return to the cleaning work.
E5 Scan Robot Introduction Video:
Q series sweeping robot
The Q series has upgraded the navigation technology and cleaning performance on the basis of the E series, but there is no significant upgrade in terms of mop performance.
Q series suction power
The Q series supports the suction of the maximum 4200Pa, and the greater suction can be more effective to completely clean the ground garbage in a single cleaning work.
The Q series can be matched with the self-clean base Auto-EMPTY Dock.The robot is completed at each cleaning work.After returning to the base, it will automatically extract the garbage in the robot’s dust compartment.Changes every 7 weeks to simplify the maintenance of the robot, while avoiding the secondary pollution of dust occurred when cleaning the dust compartment.
Q series navigation
The Q series stone sweeping robot enables Laser navigation technology to draw space maps accurately, and can be located in real time.With the adaptive path algorithm, the best cleaning route can be intelligently planned according to the environment in the space.
In terms of map drawing, the Q7 series sweeping robot supports 2D maps and 3D maps, so you can not only plan different rooms, but also set up forbidden zones, virtual walls, or regional cleaning according to obstacles in the room, or regional cleaning.You can experience a more personalized ground cleaning program.
Q series mop floor
The Q series uses a fixed mop header design, which is similar to the E series, so the ultrasonic vibration mop function cannot be achieved.Instead, in the scanning program, clean the ground after the vacuum is cleaned with fixed pressure.
And the Q series uses gravity induction water supply tanks, which cannot accurately release appropriate water volume to mop the floor, so the ground may be too dampness.
Q series battery life
The maximum battery life of the Q series is 180 minutes.It supports the automatic rechargement function, so you can clean the small area space at one time.When cleaning a large area space, you can automatically return to the cleaning after low electricity.
Q7 MAX+Sweeping Robot Introduction Video:
S series sweeping robot
The S series is the top series of stone sweeping robots.Among them, the S7 MAXV is also equipped with all the most cutting-edge technologies of the current stone brand, providing the best cleaning performance.
The suction of the s series
The S series can provide a maximum suction power of 5100Pa, which can be said to be the top level in the industry.Super suction means that it can clean up a variety of garbage on the ground more efficiently, and in terms of noise, the S series has not increased significantly because of the improvement of the suction power.Generally, under the operation mode, noise level and Q series and Q series and Q series and Q series and Q series and Q series and Q series and Q series and Q series and Q series and Q series and Q series and Q series and Q series and Q series and Q series and Q series and Q seriesThe E series is about 67 decibels.
The S series is also equipped with Auto-Empty Dock self-cleaning base, which also adds multiple filtration systems in the base.Therefore, it can further filter the fine particles in the garbage and reduce the chance of air pollution of air.
The S7 Maxv can also be paired with the self-clean base EMPTY WASH FILL Dock.This base can not only extract garbage in the scanning robot to collect the garbage, but also automatically add water tanks to the robot’s water tank, clean the robot mop, and then complete the self-cleaning work.FurthermoreSimplify the maintenance of the floor-to -floor robot, without manual cleaning the mop cloth, and add water to the robot’s water tank.You only need to pour dirty water, add water, and replace the dust bag.
S series navigation
In terms of navigation, the S series also uses LDS laser navigation technology to draw 3D maps to provide accurate map drawing and navigation paths.
The S7 MAXV model of the S7 series has LED lighting on the front side of the fuselage, so when the robot enters the dim environment, it can be illuminated in time to exert a stable navigation function.At the same time, it is also equipped with ReactiveAI obstacle avoidance function.This function can intelligently identify different obstacles with the cooperation of the camera.Different cleaning methods are performed according to your settings, such as to avoid collision, or more clean areaThe use of floor sweeping robots is more flexible.
S7 Maxv is aiming at the iPhone 12 and above users, and also supports the Matrix map function.This map can display more room details than 3D maps, including displaying sofas, cabinets and bed furniture, which can help you better set clean sweeping robot parameters betterEssence
S series mopping ability
The latest model of the S series has upgraded the mop head, using a design that can be moved up and down, providing an ultrasonic vibration mop function.The ultrasonic vibration of 3,000 times per minute is significantly improved by the relatively fixed mop header.
The S series of water tanks are electronic control water tanks.The appropriate water volume will be released according to the set of the settings of the setting to ensure that the ground is completely cleaned, and the residual water stains will not occur.After the mop can be, it can be walked directly on the ground.
The battery life of the s series
The battery life of the S series is also about 180 minutes.The automatic recharge function allows you to use all the functions of the screen-sweeping robot at ease.You do n’t need to worry about the stagnation of half of the power and stagnation in place.
S7 sweeping robot introduction video:
S7 Maxv Sweeping Robot Introduction Video:
Introduction to the Scanning Robot Sweeping Robot Sweeping Robot Sweeping Robot?
When choosing a stone sweeping robot, you can choose according to the following sweeping robot parameters, including: the suction, navigation technology, obstacle avoidance technology, map drawing, mopping method, carpet cleaning and self-cleaning base of stone sweeping robots.
The suction of the stone sweeping robot
Metal-sweeping robots provide a basic suction power of 2000Pa.In different series, different maximum suction power will be provided, including the 2500Pa suction power of the E-series, the 2700 PA suction power of the Q series, and the 5100 PA suction power of S suction.
The size of the suction power will decide the strength of the cleaning ability, and it will also affect the price of the robot.
If the environment at home is relatively neat, only the basic cleaning function is required.The suction power of 2500 PA is basically enough.If there are pets or more personnel in the home, it is better to choose a higher suction value.clean.
The navigation technology of the stone sweeping robot
Different series of stone sweeping robots mainly use inertial navigation technology or LDS laser navigation technology.
Sweeping robots that use inertia navigation technology are low, and the accuracy of navigation is limited.It cannot intelligently identify obstacles.At the same time, the map cannot be stored.You can only check the local clean map after each cleaning work.User choices.
LDS laser navigation technology is more accurate, you can draw accurate room maps and store, and then you can set different areas and clean sweeping robotic parameters as needed.The sense of use is more flexible and personalized.Stone sweeping robot models with LDS laser navigation technology are generally more expensive than inertial navigation technology models, but they will also have different prices according to other performances.Generally speaking, most users choose the types of navigation technology.
Stone Scanning Robot Avoiding Technology
The model sweeping robot model that uses inertia navigation technology mainly uses a collision to avoid obstacles.That is to say, the robot will bypasses the obstacles only after a collision, which is suitable for areas with simpler terrain.
Sweeping robot models using LDS laser navigation technology can identify obstacles through laser scans, that is, obstacles can be performed before collision, which can improve the cleaning efficiency of the robot and extend the life of the robot.
In the S7 MAXV model, the ReactiveAI obstacle avoidance function is also used.This function supports the category of obstacles to the scanning robot recognition obstacle, and then intelligently judge the cleaning mode.The overall sense of use is more optimized, but the price is more expensive.
Map drawing of stone sweeping robots
The E series of the stone sweeping robot does not support storage maps, so it is impossible to set different areas and clean sweeping robotic parameters.
Both the Q series and the S series support 2D maps and 3D maps.Relying on LDS laser navigation technology, it can accurately draw obstacles in different rooms and rooms, and then perform clean sweeping robot parameters in different areas according to needs.
S7 maxv map function:
The main roll brush type of the stone sweeping robot
The main roller brush of the stone sweeping robot has a fiber rubber combination and a pure rubber roller brush.
The fiber rubber combination roller brush is mainly used in S6 and below models and E series models.This type of roller brush is very effective for cleaning dust, paper crumbs, etc., but it is easy to reduce cleaning efficiency due to entanglement when cleaning hair.
Pure rubber roller brush is mainly used in S7 and above models and Q series models.This type of roller brush is very friendly to hardwood flooring and is not easy to scratch the floor.At the same timeThis kind of roller brush.
Different master rolling brushes comparison video:
Mopping
The E-series and Q series of the stone sweeping robot use a fixed mop head.During the mopping process, the mop is used to mop.When entering the carpet area, the mop head will not be raised, which means that it may not be smooth smoothly.Clean, so if there is a carpet area at home, it is not recommended to use these two series of robots for mopping work.
The S series can be used to move up and down mop head design.During the mop, it provides a vibration frequency of 3,000 times per minute.Ultrasonic vibration mop is performed.With the electronic control water tank, it can be more efficiently mopped to clean and clean the ground., Suitable for all types of venues.
Carpet cleaning ability
Among the stone sweeping robots, the carpet cleaning provides different cleaning techniques.
The E series uses Hyperforce technology.When the robot detects the carpet area, it will automatically improve the cleaning and suction power, but the mop function does not have a needle of the carpet.
The Q series uses Automatic Carpet Boost TurnS technology, which will also increase the cleaning of the carpet area when the robot detects the carpet area, but it also does not design the carpet in terms of mop function.
The S series not only supports the scanning function to automatically improve the cleaning and suction power when detecting the carpet area.At the same time, the mop function also supports the automatic raising when encountering the carpet.Therefore, it can directly enter the carpet area during the cleaning process.convenient.
Self-cleaning base
The Q series of the stone sweeping robot can use Auto-EMPTY Dock self-cleaning base.When the robot returns the base, the garbage in the robot set in the dust warehouse will be automatically drawn out.Essence
The S-series sweeping robot supports the upgraded version of Auto-EMPTY Dock self-cleaning base.There are multiple filtering systems on the base to better prevent air pollution in the process of cleaning the dust collector.In addition to the use of an upgraded version of Auto-EMPTY Dock self-cleaning base, the S7 Maxv model also supports the use of Empty Wash Fill Dock self-cleaning base.The cloth and the cleaning base itself further simplified the sense of use of the sweeping robot.
Two self-clean base comparison videos applicable to the S7 series:
What are the advanced black technologies of the stone sweeping robot?
The predecessor black technology that is proud of the stone sweeping robot includes the adaptive routing algorithm, the water washing bin with water washing E11 air filters, the ultrasonic vibration mop function, and the multi-function self-cleaning base.
1.Adaptive routing algorithm
The Q series and S series of the stone sweeping robot support the adaptive routing algorithm technology.With the LDS laser navigation element, the space map can be accurately drawn.According to the distribution of different obstacles in the space, the most efficient can be set through adaptive routing algorithm technology technology.Cleaning route.
2.The water-washing of water-washing E11 air filters
The stone scanning robot’s dusting warehouse supports the washing function, which not only extends the service life of the screen sweeping robot, but also improves the cleaning efficiency.At the same time, the dust compartment has a washed E11 air filter to effectively intercept a large amount of fine dust.The water washing performance reduced the cost of the robot.
3.Ultrasonic vibration mop function
The S series of the stone sweeping robot supports the ultrasonic vibration mop function.By high-frequency vibration of 3,000 times per minute, it can clean the ground stains quickly and improve the cleaning efficiency of the scanning robot.
4.Multi-function self-cleaning base
The latest self-cleaning base EMPTY WASH FILL Dock launched by the stone sweeping robot, which can be said to create a new era of the floor sweeping robot.
Not only does it support the function of clearing the garbage in the dust collection warehouse, but also can automatically add water to the robot’s water tank, clean the mop cloth, and then collect sewage for self-cleaning.Therefore, you are using the stone with the Empty Wash Fill Dock.When sweeping robots, what to do is to dump the sewage regularly, add water to the water tank, and replace the dust collecting bags in the dust box, which simplifies the maintenance process of using the sweeping robot.